Swing Carriage

Swing Carriage - The maximum load capacity for forklift jibs in both the retracted or extended positions vary starting from 1935 lbs to 6000 lbs. It's a good suggestion to ask a material handling specialist about the restrictions for your specific application. The load capacity ratings are really meant for the jib itself and not the forklift or the utmost load that can be transferred securely with a certain forklift. It is important to keep in mind that at any time when whatever attachments such as a lift truck jib are fitted to the forklift, the new center of gravity created by the accessory will decrease the general lift capability of the forklift. There are guidelines accessible which provide information on the way to properly calculate these load limits.

Prior to using whatever forklift jib, be sure that the shackles and hooks are properly secured to the lift truck. Verify and even double check that the pins are tight. It is very important that the load calculations have been correctly made and double checked. Remember to take into consideration the fact that rated capacities at times decrease each time the boom is in a raised position, each time the boom is extended with telehandlers or even every time the mast is slanted frontward.

Important tips every time you are using an adjustable jib is to never pull a load with the use of this kind of accessory. These types of attachments are just meant for vertical lifting. Also, refrain from letting the load move backward and forward. Use extreme caution each and every time a load is lifted to avoid tipping over the truck.

Click to Download the pdf

Forklift Parts

Forklift Alternators and Starters

Forklift Starters and Alternators - A starter motors today is typically a permanent-magnet composition or a series-parallel wound direct current electrical motor with a starter solenoid installed on it. As soon as current from the starting battery is applied to the solenoid, basically via a key-operated switch, the solenoid engages a lever which pushes out the drive pinion which is...

More

---

Attachments for LPG Forklifts

LPG Forklift Attachments - Liquid petroleum fuel, utilized in heating appliances and vehicles, is a very combustible mixture of hydrocarbon gases. LPG has likewise been more and more utilized as an aerosol propellant and refrigerant. Liquefied petroleum gas or also called LPG, is replacing chlorofluorocarbons in an effort to be able to decrease ozone layer damage. Normally referred to as...

More

---

Clark Forklift Attachments

Clark Forklift Attachments - Performing globally, there are now 350,000 Clark forklifts and lift vehicles in operation, with more than 250,000 of those operating in North America. Clark has five major lines of forklifts across the globe, making it one of the most expansive corporations in the industry. Heavy duty trucks ranging from 1,500lb to 18,000lb capacities, duel fuel, petrol,...

More

---

Part for Compact Scissor Lift

Compact Scissor Lift Parts - The scissor lift, often identified as a table lift, is an industrialized lift that has been tailored for usage in wholesale and retail settings. Mechanized lifts have been used for decades within the manufacturing and production industries to effectively elevate and lower people, resources and gear. The scissor lift is a platform with wheels that...

More

---

Carriage

Carriages and Carriage Parts - Rated by the tine carriage lifting capacity, there are actually four sizings of hook type tine carriages. The hook type tine carriages have been standardized. Class I carriages are rated for loads up to 2000 lbs. The carriage bar spacing used for Class I is 13 inches. Class II carriages are rated for cargo as...

More

---

Parts for Narrow Aisle Forklifts

Narrow Aisle Forklift Parts - At first, few foresaw the extent of the influence that containerization would bring to the shipping business. Benjamin Chinitz, a Harvard University economist predicted in the nineteen fifties that containerization would benefit New York by enabling it to ship its industrial products more cost effectively to the Southern USA than other areas could. He did...

More

---

Attachments for JLG

JLG Attachments - In the late 1960's John L. Grove, with his wife Cora embarked on on a cross country trip in their RV. Newly retired, after spending numerous years working with his brother to develop their crane business into an industry leader, John had no idea that fateful trip would permit JLG Industries, Inc to emerge. The world leader...

More

---

Truss Jibs

Truss Jib - Truss jib's can actually be utilized to be able to lift, transport and place trusses. The additional part is designed to operate as an extended jib additional part with a triangular or pyramid shaped frame. Usually, truss jibs are mounted on machinery like a skid steer loader, a compact telehandler or a forklift making use of a...

More

---