Cascade Clamps

Cascade Clamps - Cascade Manufacturing Company was established in Portland, Oregon in the year 1943. They started out as a small machine shop at first hiring 4 people. Sales for their first year of operation amounted to about sixty thousand dollars. The first recorded sales revenues involved the assembly and machining of stainless-steel pipe fittings, valves and various components. During 5 years of operation, the company had expanded to forty staff and their annual sales volume had risen to $330,000. Nowadays, Cascade is among the leading worldwide makers within the material handling business.

Design and manufacturing of the company's very first hydraulic cylinder allowed this new company to aggressively pursue better business possibilities. All through the final 60 years, the industry of material handling has grown into a very advanced area with Cascade proudly playing a part in its development. Cascade currently continues to develop as the premier supplier of lift truck accessories and numerous associated products. The company feels confident in their skill so as to continue to lead the way in the business by understanding client's requirements in the future and remaining competitive in the international market.

In the 1950's, Cascade began designing, fabricating and selling hydraulic accessories. Construction was completed in 1956 on a brand new facility in order to accommodate all the office and plant operations in Portland, Oregon at the company's current center of operations. After 15 years of business, total workers reached a hundred and eighty employees and sales had reached almost 2.3 million dollars.

1959 in Springfield, Ohio a second production facility was built. The year 1960 marked Cascade's preliminary transfer into the global world of the material handling industry as the business established interest in the Netherlands, England, and Australia.

The business altered its name to Cascade Corporation in 1964. In the year 1965, Cascade went public with a preliminary offering of two hundred thousand shares of common stock. The company has expanded its production plants within the U.S. with locations in Warner Robins, Georgia, Portland, Oregon and Springfield, Ohio. Cascade products are made worldwide because of a lot of subsidiary operations. In the year 1944, a brand new plant was accomplished in Almere, the Netherlands which is Cascade's European control center. This plant is built to be the ultimate customer support centre.

Cascade further expanded their product base in 1996 and 1997 after acquiring 5 companies, which included the Kenhar Corporation, the worldwide best in blades.

Click to Download the pdf

Forklift Parts

Forklift Alternators and Starters

Forklift Starters and Alternators - A starter motors today is typically a permanent-magnet composition or a series-parallel wound direct current electrical motor with a starter solenoid installed on it. As soon as current from the starting battery is applied to the solenoid, basically via a key-operated switch, the solenoid engages a lever which pushes out the drive pinion which is...

More

---

Attachments for LPG Forklifts

LPG Forklift Attachments - Liquid petroleum fuel, utilized in heating appliances and vehicles, is a very combustible mixture of hydrocarbon gases. LPG has likewise been more and more utilized as an aerosol propellant and refrigerant. Liquefied petroleum gas or also called LPG, is replacing chlorofluorocarbons in an effort to be able to decrease ozone layer damage. Normally referred to as...

More

---

Clark Forklift Attachments

Clark Forklift Attachments - Performing globally, there are now 350,000 Clark forklifts and lift vehicles in operation, with more than 250,000 of those operating in North America. Clark has five major lines of forklifts across the globe, making it one of the most expansive corporations in the industry. Heavy duty trucks ranging from 1,500lb to 18,000lb capacities, duel fuel, petrol,...

More

---

Part for Compact Scissor Lift

Compact Scissor Lift Parts - The scissor lift, often identified as a table lift, is an industrialized lift that has been tailored for usage in wholesale and retail settings. Mechanized lifts have been used for decades within the manufacturing and production industries to effectively elevate and lower people, resources and gear. The scissor lift is a platform with wheels that...

More

---

Carriage

Carriages and Carriage Parts - Rated by the tine carriage lifting capacity, there are actually four sizings of hook type tine carriages. The hook type tine carriages have been standardized. Class I carriages are rated for loads up to 2000 lbs. The carriage bar spacing used for Class I is 13 inches. Class II carriages are rated for cargo as...

More

---

Parts for Narrow Aisle Forklifts

Narrow Aisle Forklift Parts - At first, few foresaw the extent of the influence that containerization would bring to the shipping business. Benjamin Chinitz, a Harvard University economist predicted in the nineteen fifties that containerization would benefit New York by enabling it to ship its industrial products more cost effectively to the Southern USA than other areas could. He did...

More

---

Attachments for JLG

JLG Attachments - In the late 1960's John L. Grove, with his wife Cora embarked on on a cross country trip in their RV. Newly retired, after spending numerous years working with his brother to develop their crane business into an industry leader, John had no idea that fateful trip would permit JLG Industries, Inc to emerge. The world leader...

More

---

Truss Jibs

Truss Jib - Truss jib's can actually be utilized to be able to lift, transport and place trusses. The additional part is designed to operate as an extended jib additional part with a triangular or pyramid shaped frame. Usually, truss jibs are mounted on machinery like a skid steer loader, a compact telehandler or a forklift making use of a...

More

---